Air compressor pressure adjustment is a process to adjust the air pressure output from the compressor to the desired value. The pressure adjustment is usually carried out on the compressor's control panel or pressure regulating valve. Here is a general instruction:

Find the Control Panel: Locate the control panel or the pressure regulating valve of the compressor. This is usually located on or near the compressor.

Find the Pressure Regulating Valve: The control panel or pressure regulating valve has a pressure regulating knob or valve. This knob or valve allows you to adjust the pressure setting.

Determine the Desired Pressure Value: Determine the pressure level you want to set. This may depend on the requirements of the application or device in which the compressor is to be used. For example, an aircraft may require a different pressure, while a pneumatic tool may require a different pressure.

Change the Pressure Setting: Set the desired pressure value using the pressure adjustment knob or valve. This is usually done by a mechanism that provides a clockwise or anti-clockwise rotation or an up-and-down movement, for example. Monitor the pressure gauge of the compressor and check if it reaches the pressure value you have set.

Test the Pressure Setting: Operate the compressor and monitor the air pressure output to verify the pressure value you have set. You can be sure that the pressure setting is correct when the pressure value reaches or slightly exceeds the desired value.

Note: When you adjust the pressure, read the instruction manual of the compressor carefully and follow the manufacturer's instructions. Also, keep the safety precautions in mind and use personal protective equipment in order to perform the pressure adjustment correctly.

 How to Increase the Pressure of an Air Compressor?

You may follow the steps below to increase the output pressure of the air compressor.

Turn off the Compressor: Turn off the compressor before increasing the pressure and switch off the power supply for safety reasons.

Find the Pressure Regulating Valve: Locate the pressure regulating knob or valve on the compressor control panel or pressure regulating valve.

Determine the Desired Pressure Value: Determine the new pressure value you want to set to increase the pressure. Be careful and consider the design limitations of the compressor. Make sure not to exceed the maximum pressure limits specified by the manufacturer.

Increase the Pressure Setting: Increase the pressure value by turning the pressure adjustment knob clockwise or anti-clockwise. You may also increase the pressure in some compressors by moving the regulating valve upwards. This may change depending on the pressure regulating mechanism of the compressor.

Test the Pressure Setting: Operate the compressor and monitor the air pressure output to verify the pressure value you have recently set. Using a pressure gauge or another instrument, check whether the new pressure value has been reached.

Restart the Compressor: After changing the pressure setting, restart the compressor and make sure that your air system is operating correctly.

Caution: It is important that you consider the design limitations of the compressor and the requirements of the application before increasing the pressure setting. Excessive pressure may cause compressor overload or damage to other equipment. Make sure not to exceed the maximum pressure limits specified by the manufacturer and keep the safety precautions in mind.

Contact us for higher pressures.